78
SuperServer 5029C-T User's Manual
Onboard Video Option ROM
Use this feature to select the onboard video firmware type to be loaded. The options are
Legacy
and EFI.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The options are
Vendor
Defined Firmware
and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
PCIe/PCI/PnP Configuration
CPU SLOT1 PCI-E 3.0 X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
M.2-H OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled,
Legacy
, and EFI.
Onboard LAN Option ROM Type
Use this feature to select which firmware type to be loaded for onboard LAN ports. The
options are
Legacy
and EFI.
*If the feature above is set to Legacy, the following LAN ports will be listed and become
available for configuration:
Onboard LAN1 ~ LAN2 Option ROM
Use this feature to select which firmware function to be loaded for the specified onboard LAN
port at system boot. The options are
Disabled
,
PXE, and iSCSI*.
*iSCSI is only supported on Onboard LAN1. The default setting for Onboard LAN1 is
PXE.
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unified Extensible Firm
-
ware Interface (UEFI) for network stack support. The options are Disabled and
Enabled
.
*If the feature above is set to Enabled, the following settings will become available for
configuration:
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and
Enabled
.
