44
SuperServer 5019C-L/FL User's Manual
Onboard Buzzer
The Onboard Buzzer (SP1) is used to provide audible indicators for various beep codes. By
default, pins 6-7 of JD1 are closed with a cap, which enables the use of this buzzer.
Onboard Buzzer
Pin Definitions
Pin#
Definition
1
Pos (+)
VCC
2
Neg (-)
Beep In
Speaker Header
JD1 is used to connect an extra speaker. By default, pins 3-4 are closed with a cap to enable
the onboard buzzer at SP1. To use an extra speaker instead, connect the speaker connector
to pins 1-4.
Speaker/Onboard Buzzer Header
Pin Definitions
Pin#
Signal
1
P5V
2
Key
3
R_SPKPIN_N
4
R_SPKPIN
SATA Ports
The X11SCL-iF has four SATA 3.0 ports (I-SATA0 – I-SATA3) supported by the Intel C242
chipset. They support RAID 0, 1, 5, and 10.
Note
: Supermicro SuperDOMs are yellow SATADOM connectors with power pins built in and
do not require separate external power cables. These connectors are backwards compatible
with non-Supermicro SATADOMS that require an external power supply.
M.2 Slot
The X11SCL-iF motherboard has one M.2 slot. This offers solid state storage in a small form
factor. The motherboard supports PCI-E 3.0 x4 SSD cards and SATA 3.0 in a 2280 form factor.
