manualshive.com logo in svg

Supermicro SuperServer 5019A-12TN4, User Manual, Page: 74 / 115

Share
Download
Supermicro SuperServer 5019A-12TN4 User Manual Download Page 74

SuperServer 5019A-12TN4 User's Manual

74

iSCSI Configuration 

iSCSI Initiator Name

This feature allows the user to enter the unique name of the iSCSI Initiator in IQN format. 

Once the name of the iSCSI Initiator is entered into the system, configure the proper settings 

for the following items.

Add an Attempt

Delete Attempts

Change Attempt Order

Intel® I350 Gigabit Network Connection - OC:C4:7A:F8:1E:4A 

Intel® I350 Gigabit Network Connection - OC:C4:7A:F8:1E:4B 

Intel® I350 Gigabit Network Connection - OC:C4:7A:F8:1E:4C 

Intel® I350 Gigabit Network Connection - OC:C4:7A:F8:1E:4D 

Intel® Ethernet Connection X553/X557-AT 10GBASE-T - 00:A0... 

Intel® Ethernet Connection X553/X557-AT 10GBASE-T - 00:12... 

Intel® Ethernet Connection X553 10GbE SFP+ - 00:A0:C9:00... 

Intel® Ethernet Connection X553 10GbE SFP+ - 34:12:78:56...

These items display the following information :

NIC Configuration

Link Speed

Use this feature to change the link speed and duplex for the current port. The options are 

Auto Negotiated

, 10Mbps Half, 10Mbps Full, 100Mbps Half, and 100Mbps full.

Wake On LAN

Select enabled to wake the system with a magic packet. The options are 

Enabled

 and 

Disabled.

Summary of Contents for SuperServer 5019A-12TN4




















































































































Reviews:

No comments