13
Chapter 1: Introduction
Quick Reference Table
Jumper
Description
Default Setting
JBR1
BIOS Recovery
Pins 1-2 (Normal)
JBT1
CMOS Clear
Open (Normal)
JI
2
C1, JI
2
C2
SMB to PCI-E Slots Enable/Disable
Both Pins 2-3 (Disabled)
JPG1
VGA Enable/Disable
Pins 1-2 (Enabled)
JPL1
LAN1/2/3/4 Enable/Disable
Pins 1-2 (Enabled)
JPME2
Manufacturing Mode
Pins 1-2 (Normal)
JWD1
Watch Dog
Pins 1-2 (Reset)
LED
Description
Status
LED1
Onboard Power LED
Solid Green: Power On
LED2
UID LED
Solid Blue: Unit Identified
LEDM1
BMC Heartbeat LED
Blinking Green: BMC Normal
Connector
Description
BT1
Onboard Battery
COM1
COM Header
FAN1, FAN2, FAN3, FANA
System/CPU Fan Headers (FAN1: CPU Fan)
IPMI_LAN
Dedicated IPMI LAN Port
I-SATA0 ~ I-SATA3
Intel® PCH SATA 3.0 Ports (I-SATA0 is SuperDOM)
JD1
Speaker Header
JF1
Front Control Panel Header
JGP1
General Purpose I/O Header
JL1
Chassis Intrusion Header
JLANLED1
LAN3/LAN4 Activity LED Header
JMD1
M.2 PCI-E 3.0 x4 / I-SATA4
JMP1
Mini PCI-E 2.0 x1 / I-SATA5 Slot
JPH1
4-pin Power Connector for HDD use (To provide power from the motherboard to onboard
HDD devices)
JPI
2
C1
Power Supply SMBbus I
2
C Header
JPV1
12V DC Power Connector
JPW1
24-pin ATX Power Connector
JRT3
Thermal Diode 1 Header
JRT4
Thermal Diode 2 Header
JSD1
SATA DOM Power Connector
JSMB1
PCH SMBus Header
•
Jumpers/components/LED indicators not indicated are used for internal testing only.
•
Use only the correct type of onboard CMOS battery, as specified by the manufacturer. In
order to avoid possible explosion, do not install the onboard battery upside down.