manualshive.com logo in svg

Supermicro SuperServer 5019A-12TN4, User Manual, Page: 25 / 115

Share
Download
Supermicro SuperServer 5019A-12TN4 User Manual Download Page 25

25

Chapter 3: Maintenance and Component Installation

Installing an Expansion Card

The SC504 chassis includes a PCI slot for an optional full-height, half-length expansion 
card. A riser card is required in order to connect the expansion card to the motherboard. For 
further information on expansion on cards and risers cards, visit the Supermicro website at 

www.supermicro.com

Figure 3-4. Locating the Expansion Card Clip

Expansion Card Clip

Installing the Expansion Card

1. Power down the server, disconnect the power cord from the power supply and remove 

the cover. Locate the expansion card clip on the back of the chassis

2. Remove the screws holding the expansion card clip and the PCI slot cover which covers 

the PCI slot opening in the back of the chassis.

3. Remove the expansion card clip and the PCI slot cover from the chassis. 

Summary of Contents for SuperServer 5019A-12TN4




















































































































Reviews:

No comments