Supermicro SUPERSERVER 5015P-8, User Manual

Page: 36 / 120

5-2
S
UPER
S
ERVER 5015P-8(R)/5015P-T(R) User's Manual
5-2 Processor and Heatsink Installation
The PDSMP-8/PDSMP-i has a single LGA775 socket that supports Intel Pentium ®
D, Pentium 4 Extreme, Pentium 4 or Celeron ® D processors type processors.
!
1. Press the socket lever to release the
load plate that covers the CPU socket
from its locking position.
CPU socket (with load plate)
Socket Lever
2. Carefully lift the socket lever up to
open the load plate.
Load Plate
3. Locate Pin 1 on the CPU socket. (Pin
1 is closest to the notched corner of the
housing.) Please note that a North key
and a South key (notches) are located
at opposite sides of the CPU housing.
Load Plate
Pin 1
South Key
Step 1
Step 2a
North Key
Step 2b
Step 3
Notched
corner
Avoid placing direct pressure to the top of the processor
package. Always remove the power cord fi rst before adding,
removing or changing any hardware components.