Supermicro SUPERSERVER 5015P-8, User Manual

Page: 32 / 120

S
UPER
S
ERVER 5015P-8(R)/5015P-T(R) User's Manual
4-2
4-2 General Safety Precautions
Follow these rules to ensure general safety:
Keep the area around the SuperServer 5015P-8(R)/5015P-T(R) clean and
free of clutter.
The SuperServer 5015P-8(R)/5015P-T(R) weighs approximately 57(60) lbs
(25.9/27.3 kg) when fully loaded. When lifting the system, two people at
either end should lift slowly with their feet spread out to distribute the weight.
Always keep your back straight and lift with your legs.
Place the chassis top cover and any system components that have been
removed away from the system or on a table so that they won't accidentally
be stepped on.
While working on the system, do not wear loose clothing such as neckties and
unbuttoned shirt sleeves, which can come into contact with electrical circuits
or be pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are excellent metal
!
The power supply power cord must include a grounding plug and must be
plugged into grounded electrical outlets.
Serverboard Battery: CAUTION - There is a danger of explosion if the onboard
battery is installed upside down, which will reverse its polarities (see Figure
4-1). This battery must be replaced only with the same or an equivalent type
recommended by the manufacturer. Dispose of used batteries according to
the manufacturer's instructions.
CD-ROM Laser: CAUTION - this server may have come equipped with a CD-
ROM drive. To prevent direct exposure to the laser beam and hazardous
radiation exposure, do not open the enclosure or use the unit in any
unconventional way.
Mainboard replaceable soldered-in fuses: Self-resetting PTC (Positive
Temperature Coeffi cient) fuses on the mainboard must be replaced by trained
service technicians only. The new fuse must be the same or equivalent as the
one replaced. Contact technical support for details and support.