Supermicro SUPERSERVER 5014C-T, User Manual, Page: 53 / 108

Chapter 5: Advanced Motherboard Setup
5-19
Keyboard Wake-Up
The JPWAKE1 jumper is used to
allow the system to be woken up
by depressing a key on the key-
board from an S1 or S3 state in
Windows OS. See the table on
the right for jumper settings. Your
p o w e r s u p p l y m u s t m e e t A T X
specification 2.01 or higher and
supply 720 mA of standby power
to use this feature.
Jumper
Position
1-2
2-3
Definition
Disabled
Enabled
Keyboard Wake-Up
Jumper Settings
(JPWAKE1)
JLAN1 Enable/Disable
Change the setting of jumper JPL1
to enable or disable the JLAN1
port on the motherboard. See the
table on the right for jumper set-
tings. The default setting is En-
abled.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
JLAN1
Jumper Settings
(JPL1)
JLAN2 Enable/Disable
Change the setting of jumper JPL2
to enable or disable the JLAN2
port on the motherboard. See the
table on the right for jumper set-
tings. The default setting is En-
abled.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
JLAN2
Jumper Settings
(JPL2)
Power Force On Enable/
Disable
Jumper JPF allows you to enable
(force on) or disable the Power
Force On function. If enabled, the
power will always stay on auto-
matically. If this function disabled,
the user needs to press the power
button to power on the system.
Jumper
Position
Open
Closed
Definition
Normal
Force On
Enable/Disable
(JPF)