Supermicro SUPERSERVER 5014C-T, User Manual, Page: 42 / 108

5-8
S
UPER
S
ERVER 5014C-T User's Manual
5-6 Installing Memory
1. Memory support
The P8SCi supports up to 4 GB of DDR2-533/400 unbuffered ECC SDRAM.
The P8SCi employs a dual-channel memory configuration, meaning DIMM
sockets must be populated in pairs with the same size/same type of
memory modules.
2. Installing memory modules
Insert each memory module vertically. Pay attention to the notch along the
bottom of the module to prevent inserting it incorrectly. Gently press down
on the DIMM module until it snaps into place in the slot (see Figure 5-3).
!
CAUTION! Exercise extreme care when installing or remov-
ing DIMM modules to prevent any possible damage.
To Install: Insert module vertically and press down until it snaps into place. Pay
attention to the bottom notch.
To Remove: Use your thumbs to gently push each release tab outward to free the
DIMM from the slot.
Figure 5-3. DIMM Installation
Note: Notches
should align
with their
receptive points
on the slot
Notch
Notch
Release
Tab
Release
Tab
DIMM2