Supermicro SUPERSERVER 5014C-T, User Manual, Page: 48 / 108

5-14
S
UPER
S
ERVER 5014C-T User's Manual
Serial Ports
Two serial ports are included on
the motherboard: COM1 is a port
located under the parallel port and
COM2 is a header located near the
floppy connector. See the table
on the right for pin definitions.
Power_LED Connector
The Power LED connector is lo-
cated on pins 15 and 16 of JF1.
This connection is used to provide
LED indication of power being sup-
plied to the system. See the table
on the right for pin definitions.
IDE LED
The IDE LED is located on pins 13
and 14 of JF1. This LED is used to
display all IDE and SATA activity
on all drives. See the table on the
right for pin definitions.
Hard Drive Activity
LED Pin Definitions
(JF1)
Pin
Number
13
14
Definition
+5V
HD Activity
Pin
Number
15
16
Definition
Vcc
Control
PWR_LED Pin Definitions
(JF1)
Serial Port Pin Definitions
(COM1, COM2)
Pin Number Definition
1 DCD
2 RXD
3 TXD
4 DTR
5 Ground
Pin Number Definition
6 DSR
7 RTS
8 CTS
9 RI
10 NC
Note: Pin 10 is included on the header but not on
the port. NC indicates no connection.
Fan Headers
There are five fans on the P8SCi,
w h i c h a r e d e s i g n a t e d F a n 1
through Fan5. Connect the fan on
your CPU heatsink to the FAN1 or
FAN5 header. See the table on the
right for pin definitions.
Fan Header Pin Definitions
(FAN1-FAN5)
Pin
Number
1
2
3
Definition
Ground (black)
+12V (red)
Tachometer
Caution: These fan headers are DC power.