33
Chapter 3: Maintenance and Component Installation
Bezel
The system has an optional front bezel. An air filter is not recommended to allow greater air
flow.
Figure 3-2. Front Bezel
Removing the Bezel
1. Use the key to unlock the bezel from the chassis.
2.
Press the red lever and pull the bezel off.
Replacing the Bezel
1. Insert the two mounting pins on the left of the bezel into the holes in the tab on the
chassis (see following drawing).
2. Push and hold the release lever while pushing the bezel onto the chassis front, then
release the lever to secure the bezel.
3. Lock the bezel if desired.
Mounting
Pins
