Supermicro SuperServer 220U-MTNR User Manual Download Page 97

Page: 97 / 137

Chapter 7: Troubleshooting and Support

7.1 Information Resources

Website

A great deal of information is available on the Supermicro website,

supermicro.com

•

Specifications for servers and other hardware are available by clicking the

Products

option.

•

The

Support

option offers downloads (manuals, BIOS/BMC, drivers, etc.), FAQs, RMA,

warranty, and other service extensions.

Direct Links for the 220U-MTNR System

Web

SYS-220U-MTNR

specifications page

X12DPU-6 motherboard page

for links to the Quick Reference Guide, User Manual, validated

storage drives, etc.

Direct Links for General Support and Information

Frequently Asked Questions
TPM User Guide

General Memory Configuration Guide

BMC User Guide
SuperDoctor5 Large Deployment Guide

For validated memory, use our

Product Resources page

Figure 7-1. Supermicro Website

Chapter 7

Troubleshooting and Support

Summary of Contents for SuperServer 220U-MTNR










































































































































Search results

Summary of Contents for SuperServer 220U-MTNR

Reviews:

Related manuals for SuperServer 220U-MTNR

Brands by name

Popular brands

Supermicro SuperServer 220U-MTNR, User Manual

Search results

Summary of Contents for SuperServer 220U-MTNR

Reviews:

Related manuals for SuperServer 220U-MTNR

Brands by name

Popular brands