Supermicro SUPERSERVER 2028TR-H72FR, User Manual, Page: 86 / 136

6-12
SUPERSERVER 2028TR-HTR/HTFR/H72R/H72FR User's Manual
Figure 6-13. Adapter Card Installation
Installing the Adapter Card
Each node drawer comes equipped with an adapter card that connects the
serverboard to the backplane. See the table below for the adapter card that ships
with each system.
Installing the Adapter Card
1. Make sure the serverboard has been installed properly in the node drawer
before installing the adapter card
2. Place the adapter card and spacer plate against the node drawer, aligning the
holes in the spacer and the adapter card with the holes in the node drawer.
3. Secure the adapter card and spacer plate to the node drawer, using the five
M3 flathead screws.
4. Reconnect the wiring from the serverboard to the adapter card if necessary.
5. Return the node drawer into the chassis.
Note : This is only an example drawer; yours may look slightly different.
Motherboard
Drawer
Adapter Card Spacer Plate
Five Screws
Server Adapter Card
Server Adapter Card
2028TR-HTR BPN-ADPX9-6SATA-O-P
2028TR-HTFR BPN-ADPX9-6SATA-O-P
2028TR-H72R BPN-ADP-S2208L-H6iR-O-P
2028TR-H72FR BPN-ADP-S2208L-H6iR-O-P