Supermicro SUPERSERVER 2028TR-H72FR, User Manual, Page: 85 / 136

Chapter 6: Advanced Chassis Setup
6-11
4. Lay the serverboard in the node drawer aligning the standoffs with the
serverboard.
5. Secure the serverboard to the node drawer using the rounded, Phillips head
screws included for this purpose. Do not apply more than 8 inch-lbs. of torque
6. Install the adapter card associated with the serverboard. Refer to the next
section for instructions on installing the adapter card
7. Secure the CPUs, heatsinks, and other components to the serverboard as
described in the serverboard documentation.
8. Connect the cables between the serverboard, backplane, chassis, front panel,
and power supply, as needed. Also, fans may be temporarily removed to
allow access to the backplane ports.
9. Replace the riser card bracket and secure it with the screw.
10. Repeat for the remaining node.
Figure 6-12. Installing the Serverboard in the Node Drawer
Note : The node drawing is an example only; the actual layout differs slightly.