Supermicro SUPERSERVER 2028TP-DTFR, User Manual, Page: 12 / 140

1-2
SUPERSERVER 2028TP-DTR/DTTR/DTFR USER'S MANUAL
1-2 Serverboard Features
At the heart of the SuperServer 2028TP-DTR/DTTR/DTFR lies the
X10DRT-P/PT/PIBF, a dual processor serverboard based on the Intel®
PCH C612 chipset and designed to provide maximum performance. Two of these
serverboards can be mounted in the -R1K28B chassis.
The sections below cover the main features of the X10DRT-P/PT/PIBF serverboard
(see Figure 1-1 for a block diagram of the chipset).
Processors
The X10DRT-P/PT/PIBF supports single or dual Intel® Xeon® E5-2600 v3/v4 series
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our website for a complete listing of supported processors (www.supermicro.
com).
Memory
The X10DRT-P/PT/PIBF has sixteen DIMM slots supporting up to 2 TB of
3DS LRDIMM (Load Reduced DIMM) or 1 TB of RDIMM (Registered DIMM)
DDR4-2400/2133/1866/1600 MHz registered ECC memory. See Chapter 5 for
details.
Note: Check the Supermicro website (www.supermicro.com) for the latest memory
support information.
SATA
A Serial ATA controller is integrated into the PCH C612 to provide up to eight SATA3
(6 Gb/s) hard drives per node (RAID 0, 1, 5 and 10 supported). The SATA drives
are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The SuperServer 2028TP-DTR/DTTR/DTFR can accommodate two low-profile
expansion cards.