50
SuperServer 1019D-(12C/14C/16C-)FRN5TP User's Manual
Disk-On-Module Power Connector
One power connector for SATA DOM (Disk-On-Module) devices are located at JSD1. Connect
appropriate cables here to provide power support for your Serial Link DOM devices.
4.4 LED Indicators
BMC Heartbeat LED
BMC_HB_LED1 is the BMC Heartbeat LED. When the LED is blinking green, the BMC is
functioning normally. Refer to the table below for more information.
BMC Heartbeat
LED Indicator
LED Color
Definition
Green:
Blinking
BMC: Normal
Power LED
PWR_LED1 is the Power LED. When this LED is lit, it means power is present on the
motherboard. In suspend mode, this LED will blink on and off. Be sure to turn off the system
and unplug the power cord(s) before removing or installing components.
Power
LED Indicator
LED Color
Definition
Off
System Off
(power cable not
connected)
Green
System On
Overheat/PWR Fail/Fan Fail LED
An Overheat/PWR/Fail Fan Fail LED is located at LED2. Refer to the table below for the
LED status.
Overheat/PWR Fail/Fan Fail
LED Indicator
LED Color
Definition
Solid Red
Overheat
Blinking Red
PWR Fail or Fan Fail
