Chapter 6: UEFI BIOS
77
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are
Disabled
and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are
Disabled
and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are
Disabled
and Enabled.
PXE boot wait time
Use this feature to specify the wait time to press the ESC key to abort the PXE boot. Press
"+" or "-" on the keyboard to change the value. The default setting is
0
.
Media detect count
Use this feature to specify the number of times media will be checked. Press "+" or "-" on
the keyboard to change the value. The default setting is
1
.
Super IO Configuration
Super IO Chip AST2500
Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable the onboard serial port specified by the user. The options are
Disabled and
Enabled
. Enable this feature for the next two features to display and only
the Change Settings feature is available for configuration.
Device Settings
This feature displays the base I/O port address and the Interrupt Request address of a
serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request address of Serial
Port 1. Select
Auto
for the BIOS to automatically assign the base I/O and IRQ address to
a serial port specified. The options are
Auto
, (IO=3F8h; IRQ=4); (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12); (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3, 4, 5, 6,
7, 9, 10, 11, 12); and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
