6-5
6-4
Chapter 6: Advanced Chassis Setup
S
UPER
S
ERVER 1018R-WR User's Manual
6-4 Installing Hard Drives
The server supports two fixed 2.5" hard disk drives with the use of a hard drive
bracket (included with the system). Only SAS or SATA enterprise level hard drives
are recommended.
Installing Hard Disk Drives
1.
Identify the HDD bracket and secure the drive(s) to the bracket. (Figure 6-3)
2.
Secure the HDD bracket to the chassis floor. (Figure 6-4
3. Connect the HDD cabling.
Figure 6-3. Installing Hard Drives into the Bracket
Figure 6-4. Securing the HDD Tray to the Chassis Floor
Hard Drive
Bracket
Note:
Enterprise level hard disk drives are recommended for use in Supermicro chassis
and servers. For information on recommended HDDs, visit the Supermicro website at
http://www.supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf
