Supermicro Supero X9SPU-F, User Manual

Page: 28 / 107

2-2
X9SPU-F Motherboard User’s Manual
2-2 Processor and Heatsink Installation
Warning : When handling the processor package, avoid placing direct
pressure on the label area of the fan.
Notes:
Always connect the power cord last, and always remove it before adding,
removing or changing any hardware components. Make sure that you in -
stall the processor into the CPU socket before you install the CPU heatsink.
If you buy a CPU separately, make sure that you use an Intel-certified
multi-directional heatsink only.
Make sure to install the system board into the chassis before you install
the CPU heatsink.
When receiving a server board without a processor pre-installed, make
sure that the plastic CPU socket cap is in place and none of the socket
pins are bent; otherwise, contact your retailer immediately.
Refer to the Supermicro website for updates on CPU support.
Load Lever
Installing the LGA1155 Processor
1. Remove the protective plastic cap. Press the load lever to release the load
plate, which covers the CPU socket, from its locking position.
!
Load Plate