Supermicro Supero X9SPU-F, User Manual

Page: 78 / 107

4-10
X9SPU-F Motherboard User’s Manual
AHCI Mode
The following items are displayed when AHCI Mode is selected:
Aggressive Link Power Management
This feature Enables or Disables Aggressive Link Power Management
support for Cougar Point B0 stepping and later. The options are
Enabled
and Disabled.
Serial ATA Port 0~5 Hot Plug
Set this item to Enabled to enable hot-plugging for the particular port.
The options are
Enabled and Disabled.
Serial ATA Port 0~5 Staggered Spin Up
Set this item to Enabled to enable Staggered Spin-up support. The options
are Enabled and
Disabled .
RAID Mode
The following items are displayed when RAID Mode is selected:
Serial ATA Port 0~5 Hot Plug
Set this item to Enabled to enable hot-plugging for the particular port.
The options are
Enabled and Disabled.

PCIe/PCI/PnP Configuration
This feature allows the user to set the PCI/PnP configurations for the following items:
PCI Latency Timer
This feature sets the latency Timer of each PCI device installed on a PCI bus. Se-
lect 64 to set the PCI latency to 64 PCI clock cycles. The options are 32 PCI Bus
Clocks,
64 PCI Bus Clocks , 96 PCI Bus Clocks, 128 PCI Bus Clocks, 160 PCI
Bus Clocks, 192 PCI Bus Clocks, 224 PCI Bus Clocks and 248 PCI Bus Clocks.
Above 4G Decoding
Set this item to Enabled to activate 64-bit capable devices to be decoded above
the 4G address space. This works only if the system supports 64-bit PCI decoding.
The options are Enabled and Disabled .
Onboard LAN Option ROM Select
This feature selects whether to load the iSCSI or PXE onboard LAN option ROM.
The options are iSCSI and
PXE .