Supermicro Supero SUPERSERVER 6027TR-DTFRF, User Manual

Page: 12 / 138

1-2
SUPERSERVER 6027TR-DTQRF/DTFRF/DTRF User's Manual
1-2 Serverboard Features
A t t h e h e a r t o f t h e 6 0 2 7 T R - D T Q R F / D T F R F / D T R F s e r v e r l i e s t h e
X9DRT-HIBQF/HIBFF/HF, a dual processor serverboard based on the Intel®
C602 PCH chipset and designed to provide maximum performance. Two of these
serverboards can be mounted in the SC827HD-R1K28B chassis.
The sections below cover the main features of the X9DRT-HIBQF/HIBFF/HF
serverboard (see Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRT-HIBQF/HIBFF/HF supports single or dual Intel® Xeon® E5-2600 series
processors (Socket R LGA 2011). Please refer to the serverboard description pages
on our web site for a complete listing of supported processors ( www.supermicro.
com ).
Memory
The X9DRT-HIBQF/HIBFF/HF has eight (8) DIMM slots supporting up to 256 GB
of DDR3-1600/1333/1066/800 MHz speed registered ECC SDRAM in up to
512 MB, 1 GB, 2 GB, 4 GB, 8 GB, 16 GB or 32 GB sizes at 1.35V or 1.5V
voltages. See Chapter 5 for details.
Note: Check the Supermicro website ( www.supermicro.com ) for the latest memory
support information.
Serial ATA
A Serial ATA controller is integrated into the C602 to provide up to a six-port 6 Gb/s
SATA subsystem, (two SATA 3 (6 Gb/s) and four SATA 2 (3 Gb/s), which support
RAID 0, 1, 5 and 10. The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability and RAID function of the SATA drives.
PCI Expansion Slots
The X9DRT-HIBQF/HIBFF/HF serverboard has the following expansion slots:
•
One (1) PCI Express 3.0 x16 slot (Slot 1)
•
One (1) PCI Express 3.0 x8 slot for rear I/O riser card (SXB1)
•
One (1) PCI Express 3.0 x8 slot for SMC proprietary daughter (add-on) card
(SXB2)