Supermicro SUPERO SUPERSERVER 2027GR-TRF, User Manual

Page: 39 / 112

Chapter 5: Advanced Serverboard Setup
5-7
Warning: You can only install the CPU to the socket in one direction. Make
sure that the CPU is properly inserted into the socket before closing the
load plate. If it doesn't close properly, do not force it as it may damage
your CPU. Instead, open the load plate again and double-check that the
CPU is aligned properly.
!
7. With the CPU in the socket, in-
spect the four corners of the CPU
to make sure that they are fl ush
with the socket.
8. Close the load plate. Lock the
lever labeled 'Close 1st', then lock
the lever labeled 'Open 1st'. Use
your thumb to gently push the
load levers down until the lever
locks.
9. Repeat the procedure to install
a second processor in the CPU2
socket if desired.
Note: the PCI-E slots are controlled by
the presence of a CPU. Slots will not
be functional if the CPU that controls
them is not installed. See Section 5-7
for details.
OPEN 1st OPEN
1st
OPEN 1st OPEN
1st
Lever Lock
Push down
and lock the
lever labeled
'Open 1st'.
Push down and lock the
level labeled 'Close 1st'.
Gently close
the load plate.