Supermicro SUPERO SUPERSERVER 2027GR-TRF, User Manual

Page: 10 / 112

1-2
S
UPER
S
ERVER 2027GR-TRF User's Manual
1-2 Serverboard Features
At the heart of the SuperServer 2027GR-TRF server is the X9DRG-HF, a dual pro-
cessor serverboard based on the Intel C602 chipset. Below are the main features
of the X9DRG-HF. (See Figure 1-1 for a block diagram of the chipset).
Processors
The X9DRG-HF supports two Intel Xeon E5-2600 series processors in LGA 2011
sockets (Socket R). Please refer to the serverboard description pages on our web
site for a complete listing of supported processors (www.supermicro.com).
Memory
The X9DRG-HF has eight DIMM slots that can support up to 256 GB of registered
ECC DDR3-1600/1333/1066/800 MHz RDIMMs. Modules of the same size and
speed are recommended. See Chapter 5 for details.
Serial ATA
A SATA controller is integrated into the chipset to provide a 10-port SATA subsystem,
which is RAID 0, 1, 5 and 10 supported. Two of these are SATA 3.0 ports and eight
are SATA 2.0 ports. The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the
hot-swap capability and RAID function of the SATA drives. One RAID level may
be applied to HDDs 0-3 and one RAID level may be applied to HDDs 4-7. See
Section 6-4 for details.
PCI Expansion Slots
The X9DRG-HF has four PCI-Express 3.0 x16 slots to support four double-width
GPU cards. Additional slots support one PCI-Express 3.0 x8 low-profi le card and
one PCI-E 2.0 x4 standard card.
Onboard Controllers/Ports
The color-coded I/O ports include one COM port (an additional COM header is
located on the serverboard), a VGA (monitor) port, two USB 2.0 ports, two Gb
Ethernet LAN ports (or two optional 10 Gb ports) and one dedicated IPMI LAN port.