Chapter 1: Introduction
1-5
PDSML-LN1+/PDSML-LN2+ Quick Reference
Jumpers
Description
Default
Setting
JBT1
CMOS Clear
See Section 2-7
JI
2
C1/JI
2
C2
I
2
C Bus to PCI Slots 1/2
Open (Disabled)
JPF
Power Force-On
Open (Disabled)
JPG1
VGA Enable
Pins 1-2 (Enabled)
JPL1/JPL2 (*Note)
Giga-bit LAN 1/2/3/4 Enable Pins 1-2 (Enabled)
Connectors
Description
24-PIn ATX (JPW1)
ATX 24-Pin Power Connector
8-Pin PWR (JPW2)
12V 8-pin PWR Connector
Alarm Reset (JPR1)
Redundant Power Alarm Reset
Chassis Intrusion (JL1)
Chassis Intrusion Header
COM1 (J31), COM2
COM Port 1 & COM 2 Header
DIMM#1A,#2A,#1B,#2B
Memory (DIMM) Slots (DIMM 1-DIMM 4)
Fans 1-6
System Fan Headers (Fans 1-5), Fan6: CPU Fan
FP Control (JF1)
Front Panel Control Header
Floppy Connector (J27)
Floppy Disk Connector
IDE (J3)
IDE#1 Slot
IPMI (*Note)
IPMI 2.0 Slot
KB/MS (J28)
PS/2 Keyboard/Mouse Connectors
LAN1-LAN2 (JLAN1/2)(*Note) Ethernet RJ45 (Gigabit LAN) Port1/Port2 Connections
Power Fault (PW3)
Power Fault Header
Power LED (JLED)
PWR LED Header
Power SMB (I2C) (PW4)
Power SMB (System Management Bus) Connector
SATA 0-3
Intel SATA Ports (#1-#4)
Slot 4
PCI 32-bit 33MHz slot
Slot 5
PCI-Express x4 slot
Slot 6 + SBX
PCI-Express x8 slot + SBX: PCI 32-bit 33MHz slot
Speaker (J9)
Speaker Connector (Pins 3-4:Internal,Pins 1-4:External)
USB1/2 (J15)
Back Panel Universal Serial Bus Ports 1,2
USB3/4 (J46),USB5/6 (J45) Front Panel Accessible USB Ports 3,4,5,6
VGA (JG1)
VGA Connector
WOL (WOL)
Wake On LAN header
WOR (JWOR)
Wake On Ring header
LED Indicator
Description (*(Refer to Addendum A)
LE 1
Onboard PWR warning LED Indicator
LE3/LE4
BIOS POST Code Indicators
(*Note: JPL2, IPMI and LAN2 are Available on the PDSML-LN2+ only. Please refer to
Note 5 on Page 1-4.)
