78
Chapter 6: Optional Components
10. If cross-controller RAID is required, select
Enable RAID spanned over VMD
Controller
.
11.
Select specific disks for RAID with an [X].
•
RAID0: Select at least two [2 - 24] disks
•
RAID1: Select only two disks
•
RAID5: Select at least three [3 - 24] disks
•
RAID10: Select only four disks
12. Select
Strip Size
(Default 64KB).
13. Select
Create Volume
.
14. If another RAID is needed, start again at step 9.
15. Press [F4] to save and reboot.
Figure 6-8. Created Volume
without
enabling RAID spanned over VMD
controller
Figure 6-9. Created Volume
with
enabling RAID spanned over VMD
controller