11
Chapter 1: Introduction
Control Panel Features
Feature
Description
Power button
The main power switch applies or removes primary power from the power supply to the server
but maintains standby power.
Reset Button
The reset button is used to reboot the system
Power LED
Indicates power is being supplied to the system power supply units. This
LED is illuminated when the system is operating normally.
HDD
Indicates activity on the storage drives when flashing.
NIC LEDs
Indicates network activity on LANs when flashing.
Power Fail LED Indicates a power supply module has failed.
Information LED Alerts operator to several states, as noted in the table below.
Control Panel
Figure 1-2. Control Panel
Information LED
Power Fail LED
Power
HDD
Reset
NIC LED
Power LED
NIC LED
Drive Carrier LED Indicators
Color
Blinking Pattern
Behavior for Device
Activity
LED
Blue
Solid On
Idle SAS/NVMe drive installed
Blue
Blinking
I/O activity
Off
Idle SATA drive installed
Status
LED
Red
Solid On
Failure of drive with RSTe support
Red
Blinking at 1 Hz
Rebuild drive with RSTe support
Red
Blinking with two blinks
and one stop at 1 Hz
Hot spare for drive with RSTe support
Red
On for five seconds,
then off
Power on for drive with RSTe support
Red
Blinking at 4 Hz
Identify drive with RSTe support
Green
Solid on
Safe to remove NVMe drive
Amber
Blinking at 1Hz
Do not remove NVMe drive
