Chapter 7: AMI BIOS
7-23
7-22
SUPERSTORAGESYSTEM SSG-2028R-DN2R20L User's Manual
MMIO High Size
Use this item to select the high I/O memory size according to memory-address
mapping for the PCH chip. The options are
256G
, 128G, 512G, and 1024G.
PCI Devices Option ROM Settings
CPU2 PCI-E 3.0x8 Slot1 OPROM/CPU2 PCI-E 3.0x16 Slot2 OPROM/CPU2
PCI-E 3.0x16 Slot3 OPROM/CPU1 SAS AOM1 (Add-On Module#1) Slot4
OPROM/CPU1 SIOM Card Slot5 OPROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled,
Legacy
,
and EFI.
Onboard NVMe1 Option ROM/Onboard NVMe2 Option ROM/Onboard Video
Option ROM
Select Enabled to enable Option ROM support to boot the computer using a de-
vice installed on the slot specified by the user. The options are Disabled and
EFI
.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are
Onboard
and Offboard.
Onboard LAN1 Option ROM/Onboard LAN2 Option ROM
Use this option to select the type of device installed in LAN Port1 or LAN Port2
for system boot. The default setting for LAN1 Option ROM is
PXE
, and for LAN2
Option ROM is
Disabled
.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-
fied Extensible Firmware Interface) for network stack support. The options are
Enabled and
Disabled
.
IPv4 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv4 PXE Support. The options are
Enabled
and Disabled.
IPv6 PXE Support (Available when Network Stack is set to Enabled)
Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled
and
Disabled
.
Super IO Configuration
Super IO Chip AST2400
Serial Port 1 Configuration
Serial Port 1
Select Enabled to enable the onboard serial port specified by the user. The options
are
Enabled
and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address for
a serial port specified by the user. The default setting for Serial Port 1 is IO=3F8h
IRQ=4.
Change Port 1 Settings
This feature specifies the base I/O port address and the Interrupt Request address
of Serial Port 1. Select
Auto
for the BIOS to automatically assign the base I/O and
IRQ address to a serial port specified.
The options for Serial Port 1 are
Auto
, (IO=3F8h; IRQ=4), (IO=3F8h; IRQ=3, 4, 5,
6, 7, 9, 10, 11, 12), (IO=2F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12); (IO=3E8h; IRQ=3,
4, 5, 6, 7, 9, 10, 11, 12), and (IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12).
Serial Port Console Redirection
COM 1
COM 1 Console Redirection
Select Enabled to enable COM Port 1 Console Redirection, which will allow a client
machine to be connected to a host machine at a remote site for networking. The
options are
Disabled
and Enabled.
*If the item above set to Enabled, the following items will become available for
configuration:
Summary of Contents for SSG-2028R-DN2R20L
Page 1: ...User s Manual Revision 1 0 SuperStorageSystem SSG 2028R DN2R20L ...
Page 29: ...4 20 SUPERSTORAGESYSTEM SSG 2028R DN2R20L User s Manual Notes ...
Page 74: ...7 42 SUPERSTORAGESYSTEM SSG 2028R DN2R20L User s Manual Notes ...
Page 76: ...A 2 SUPERSERVER SSG 2028R DN2R20L User s Manual Notes ...
