manualshive.com logo in svg

Supermicro SC826 Series, User Manual

The Supermicro SC826 Series is a versatile server chassis designed for efficient storage with high-density and expandability options. To easily set up and utilize its features, you can download the comprehensive User Manual from our website, completely free. Get the most out of your SC826 with our helpful manual at manualshive.com.

Share
Download
background image

D-2

SC826 Chassis Manual

D-3  An Important Note to Users

All images and layouts shown in this user's guide are based upon the latest PCB 
Revision available at the time of publishing. The card you have received may or 
may not look exactly the same as the graphics shown in this manual.

D-4  Introduction to the BPN-SAS-826A Backplane

The BPN-SAS-826A backplane has been designed to utilize the most up-to-date 
technology available, providing your system with reliable, high-quality performance. 

This  manual  reflects  BPN-SAS-826A  Revision  1.00,  the  most  current  release 

available at the time of publication. Always refer to the Supermicro Web site at 
www.supermicro.com for the latest updates, compatible parts and supported 

configurations.

Summary of Contents for SC826 Series



















































































































































Reviews:

No comments

Related manuals for SC826 Series

Supermicro SC101iF User Manual preview
SC101iF
Brand: Supermicro Pages: 36
Sony BG-3S Service Manual preview
BG-3S
Brand: Sony Pages: 47
HP FF 12916E Product End-Of-Life Disassembly Instructions preview
FF 12916E
Brand: HP Pages: 7
HP A9508-V Product End-Of-Life Disassembly Instructions preview
A9508-V
Brand: HP Pages: 6
Corsair Obsidian 800D Quick Start Manual preview
Obsidian 800D
Brand: Corsair Pages: 1
Cabletron Systems 9C106 Setup And Installation Manual preview
9C106
Brand: Cabletron Systems Pages: 40
Transition Networks PointSystem CPSMC0200-221 User Manual preview
PointSystem CPSMC0200-221
Brand: Transition Networks Pages: 5
Transition Networks PointSystem CPSMC0200-2x0 User Manual preview
PointSystem CPSMC0200-2x0
Brand: Transition Networks Pages: 5
Transition Networks PointSystem CPSMC0100-200 User Manual preview
PointSystem CPSMC0100-200
Brand: Transition Networks Pages: 5
Transition Networks E-MCR-04 User Manual preview
E-MCR-04
Brand: Transition Networks Pages: 5
Net2Edge PacketBand ISDN Series Quick Start Manual preview
PacketBand ISDN Series
Brand: Net2Edge Pages: 15
EndRun FDC3300 User Manual preview
FDC3300
Brand: EndRun Pages: 40
EndRun TDC3303 User Manual preview
TDC3303
Brand: EndRun Pages: 44
Allied Telesis AT-MCR12 Specifications preview
AT-MCR12
Brand: Allied Telesis Pages: 2
Allied Telesis AT-SB4151 Quick Install Manual preview
AT-SB4151
Brand: Allied Telesis Pages: 11
Allied Telesis AT-MCR1 Installation Manual preview
AT-MCR1
Brand: Allied Telesis Pages: 46
Allied Telesis AT-TS24TS Installation Manual preview
AT-TS24TS
Brand: Allied Telesis Pages: 64

Brands by name

Popular brands

Load more brands