Supermicro PDSMi Plus User Manual Download Page 97

Page: 97 / 122

Appendix C: Intel HostRAID Installation Guidelines

C-9

Resetting to Non-RAID and Resetting a RAID HDD

a. From the main menu, select item3-Reset Disks to Non- RAID, and press <Enter>.

The following screen will appear:

b. Use the <Up Arrow>, <Down Arrow> keys to highlight the RAID set drive to reset

and press <Space> to select.

c. Press <Enter> to reset the RAID set drive. A Warning message displays.

d. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Exiting the Intel Matrix Storage Manager Utility:

a. From the main menu, select item4-Exit, and press <Enter>. A warning message

will appear.

b. Press "Y" to reset the drive, or type "N" to go back to the main menu.

(

Warning:

Be cautious when you reset a RAID volume HDD to non-

RAID or Re-setting a RAID HDD. Resetting a RAID volume HDD or

Resetting a RAID HDD will reformat the HDD and delete all internal

RAID structure on the drive.)

Summary of Contents for PDSMi Plus



























































































































Search results

Summary of Contents for PDSMi Plus

Reviews:

Related manuals for PDSMi Plus

Brands by name

Popular brands

Supermicro PDSMi Plus, User Manual

Search results

Summary of Contents for PDSMi Plus

Reviews:

Related manuals for PDSMi Plus

Brands by name

Popular brands