Supermicro MicroBlade MBI-6119G-T7LX, User Manual

Page: 71 / 76

A-5
:
0xFA Invalid recovery capsule
0xFB – 0xFF Reserved for future AMI error codes
Table A-4. PEI Beep Codes
# of Beeps Description
1 Memory not Installed
1
Memory was installed twice (InstallPeiMemory routine in PEI Core called
twice)
2 Recovery started
3 DXEIPL was not found
3 DXE Core Firmware Volume was not found
4 Recovery failed
4 S3 Resume failed
7 Reset PPI is not available
Table A-5. DXE Phase
Status Codes Description
0x60 DXE Core is started
0x61 NVRAM initialization
0x62 Installation of the South Bridge Runtime Services
0x63 CPU DXE initialization is started
0x64 CPU DXE initialization (CPU module specific)
0x65 CPU DXE initialization (CPU module specific)
0x66 CPU DXE initialization (CPU module specific)
0x67 CPU DXE initialization (CPU module specific)
0x68 PCI host bridge initialization
0x69 North Bridge DXE initialization is started
0x6A North Bridge DXE SMM initialization is started
0x6B North Bridge DXE initialization (North Bridge module specific)
0x6C North Bridge DXE initialization (North Bridge module specific)
0x6D North Bridge DXE initialization (North Bridge module specific)
0x6E North Bridge DXE initialization (North Bridge module specific)
0x6F North Bridge DXE initialization (North Bridge module specific)
Table A-3. PEI Phase
Status Codes Description