Supermicro MicroBlade MBI-6119G-T7LX, User Manual

Page: 57 / 76

5-11
Chapter 5: BIOS
USB3.0 Support
This setting enables or disables USB 3.0 (XHCI) controller support.
Options include Smart Auto, Auto, Enabled or
Disabled .
EHCI1
This setting controls the USB EHCI (USB 2.0) functions. One EHCI
controller must always be enabled. Options include
Enabled or Disabled.
EHCI2
This setting controls the USB EHCI (USB 2.0) functions. One EHCI
controller must always be enabled. Options include
Enabled or Disabled.
Table 5-6. SATA Configuration Sub-menu
Menu Option Description
SATA Controller This setting allows you to Enable or Disable the SATA device.
Configure SATA as
Use this setting to select the SATA mode you desire. Options include IDE,
AHCI and RAID.
Support Aggressive Link
Power Mana
Use this setting to Enable or Disable SALP.
SATA Port 0~5 Settings For each of the ports you many configure the settings listed below.
Spin Up Device
This setting allows you to Enable or Disable the Spin up Device for the
system. If enabled for any ports staggered spin up will be performed and
only the drives that have this option enabled will spin up at boot. Otherwise
all drives spin up at boot if this setting is disabled.
SATA Device Type
This setting allows you to identify that the SATA port is connected to either
a Solid State Drive or a
Hard Disk Drive .
Table 5-7. sSATA Configuration Sub-menu
Menu Option Description
sSATA Controller This setting allows you to Enable or Disable the SATA controller.
Configure sSATA as
Use this setting to select the SATA mode you desire. Options include IDE,
AHCI and RAID.
Support Aggressive Link
Power Mana
Use this setting to Enable or Disable SALP.
sSATA Port 0~3 Settings For each of the ports you many configure the settings listed below.
Spin Up Device
This setting allows you to Enable or Disable the Spin up Device for the
system. If enabled for any ports staggered spin up will be performed and
only the drives that have this option enabled will spin up at boot. Otherwise
all drives spin up at boot if this setting is disabled.
SATA Device Type
This setting allows you to identify that the SATA port is connected to either
a Solid State Drive or a
Hard Disk Drive .
Table 5-5. Chipset Configuration Sub-menu (Continued)
Menu Option Description