3-1
Chapter 3
Setup and Installation
3-1
Overview
This chapter covers the setup and installation of the MicroBlade module and its
components.
3-2
Installing MicroBlade Modules
Up to twenty-eight MBI-6119G-C4/T4 MicroBlade modules may be installed into a single
MBE-628E-xxx enclosure, or up to fourteen in a MBE-314E-xxx MicroBlade module
enclosure. MicroBlade modules with Windows and Linux operating systems may be
mixed together in the same blade enclosure.
Powering Up a MicroBlade Module Unit
Each MicroBlade module unit may be powered on and off independently from the rest of
the MicroBlade modules installed in the same enclosure. A MicroBlade module unit may
be powered up in two ways:
•
Press the power button on the MicroBlade module unit.
•
Use IPMIView or the web-browser based management utility to apply power using
the CMM MicroBlade module.
Powering Down a MicroBlade Module Unit
A MicroBlade module unit may be powered down in either of the following ways:
•
Press the power button on the MicroBlade module unit.
•
Use IPMIView or the web-browser based management utility to power down (if you
have Operator or Admin privileges on the CMM).
•
Use IPMItool when connected to the CMM to power down (if you have Operator or
Admin privileges on the CMM).
Summary of Contents for MicroBlade MBI-6119G-C4
Page 1: ...MBI 6119G C4 MBI 6119G T4 MicroBlade Module User s Manual Revison 1 0b...
Page 24: ...2 13 Chapter 2 Standardized Warning Statements...
Page 29: ...MBI 6119G C4 T4 MicroBlade Module User s Manual 2 18 UL CSA Supermicro UL CSA...
Page 31: ...MBI 6119G C4 T4 MicroBlade Module User s Manual 2 20...
