Supermicro MBI-6219G-T, User Manual

Page: 11 / 85

1-3
Chapter 1: Introduction
Storage
The MBI-6219G-T MicroBlade module can have either two SSD or one SATA3 HDD 2.5"
SATA3 per node of internally mounted drives for storage or for installation of the blade’s
operating system. See
Chapter 3: " Setup and Installation" on page 3-1 for storage
installation details.
RAID
The MBI-6219G-T MicroBlade module supports up to two SSD or one SATA3 HDD
drives so RAID 0 and 1 are supported.
Density
A maximum of twenty-eight blade modules may be installed into a single blade
enclosure. Each blade enclosure is a 6U form factor, so a standard 42U rack may
accommodate up to seven enclosures with 392 blade nodes or the equivalent of 292 1U
servers. With the inclusion of up to fourteen CMM modules and up to twenty-eight
Gigabit Ethernet switches this would occupy up to 420 space in a conventional 1U
server configuration.
BMC Password
For security, each blade unit is assigned a unique default BMC password for the ADMIN
user. It can be found on a sticker on the blade service tab, and a sticker on the
motherboard. The sticker also displays the BMC MAC address. For more information,
refer to our website at
https://www.supermicro.com/en/support/
BMC_Unique_Password . The service tab and an example sticker are illustrated below.
Service Tab
Password
Sticker