88
SuperServer E200-9AP User's Manual
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
drive and power on the system
3. While powering on the system, keep pressing <Ctrl> and <Home> simultaneously on
your keyboard until your hear two short beeps. This may take from a few seconds to
one minute.
4. After locating the new BIOS binary image, the system will enter the BIOS recovery
menu as shown below.
Note
: At this point, decide if you want to start with BIOS Recovery. If so, continue the steps
below.
5. When the screen shown above displays, use the arrow keys to select the item "Proceed
with flash update" and press the <Enter> key. You will see the BIOS recovery progress
as shown in the screen below.
Note:
Do not interrupt
the BIOS flashing until it has completed.
