12
SuperServer E200-9AP User's Manual
Jumper
Description
Default Setting
JBT1
CMOS Clear
Open (Normal); Short: Clear CMOS
JI
2
C1/JI
2
C2
SMB to PCI-E Slots Enable/Disable
Pins 1-2 (Enabled)
JPAC1
Audio Enable
Pins 1-2 (Enabled)
JPL1
LAN1 Enable/Disable
Pins 1-2 (Enabled)
JPL2
LAN2 Enable/Disable
Pins 1-2 (Enabled)
JPME2
Maufacturing Mode
P
ins 1-2 (Normal)
JWD1
Watch Dog Timer
Pins 1-2 (Reset)
Connector
Description
BT1
Onboard Battery
COM1-COM3
COM Ports supported by Novuton 5523D (COM1 in RJ45, COM1/2 support RS-232,
COM3 supports RS-485)
EDP1
Embedded DisplayPort (switch with VGA)
FAN1, FAN2
System/CPU Fan Headers (FAN1: CPU Fan)
HDMI, DP
High Definition Multimedia Interface/DisplayPort
I-SATA0, I-SATA1
Intel SATA 3.0 Ports
JD1
Speaker Header
JF1
Front Panel Control Header
JGP1
General Purpose I/O Header
JL1
Chassis Intrusion Header
JMD1
M.2 PCI-E 2.0 x2 Slot / I-SATA Slot
JPH1
4-pin Power Connector for HDD devices (provides power from the motherboard to
system HDD devices.)
JPW1
24-pin ATX Power Connector
JPV1
12V 4-pin Power Connector
JSD1
SATA DOM Power Connector
JSTBY1
Standby Power Header
JTPM1
Trusted Platform Module/Port 80 Connector
LAN1/LAN2
LAN (RJ45) Ports
M2_SRW1, M2_SRW3 M.2 Mounting Screws
SLOT1
CPU PCI-E 2.0 X2 (IN X8) Slot
USB0/1
Back panel USB 2.0 Port
USB2/3
Back panel USB 3.0 Port
USB4
USB 2.0 Type A Header
USB8/9
Front Accessible USB 2.0 Headers
VGA
VGA Port (switch with EDP1)
LED
Description
Status
LED1
Power LED S3 Blink Function
Blinking Green: S3 function
LED2
System Power LED
Solid Blue: Power On
LED3
P5V_STBY Power LED
5V Standby Power Ready
