77
Appendix D: JBOD Control Board
D.4 JBOD Power Up/Power Down Sequences
There are several procedures to turn on or off the system with the JBOD control board.
Power Up
First Use or Power Cord Plug-In
1. Plug the power cords into the rear of the power supplies.
2. Press the power button once. The JBOD control board will initiate the power up sequence.
After Normal Shutdown by IPMI or Power Button
Press the power button once. The JBOD control board will initiate the power up sequence.
After a Power Loss
The system will power up automatically after the power returns.
Power Down
Hold down the power button for at least 4 seconds. The JBOD will power down.
