59
Chapter 2: Installation
BMC Enable/Disable
JPB1 allows you to enable or disable the Baseboard Management Control (BMC) chip and the
onboard IPMI connection for remote system management/monitoring purpose. This jumper
is used together with the IPMI settings in the BIOS. After the BMC is disabled, IPMI health
monitoring and remote management functions are no longer supported. Refer the table below
for jumper settings.
Note:
Please always keep BMC enabled to make sure the platform operates reliably
with the health monitor.
BMC Enable/Disable
Jumpers Settings
Jumper Setting
Definition
Pins 1-2
Enabled (Default)
Pins 2-3
Disabled
1. BMC Enable/Disable
BIOS
LICENSE
MAC CODE
IPMI CODE
BAR CODE
C9X299-PGF-L
REV
:1.01
+
1
+
PCIE M.2 M-2
PCIE M.2-M1
U.2-1
U.2-2
CLEAR CMOS
I-SATA5
I-SATA4
I-SATA3
USB 4/5(3.0)
USB 2/3
USB 0/1
PCH SLOT2 PCI-E 3.0 X1
USB 10/1
1(3.0)
CPU SLOT1 PCI-E 3.0 X8 (IN X16)
CPU SLOT7 PCI-E 3.0 X16
CPU SLOT3 PCI-E 3.0 X8 (IN X16)
CPU SLOT5 PCI-E 3.0 X8 (IN X16)
I-SATA2
I-SATA0
I-SATA1
DIMMA1
DIMMB2
DIMMB1
DIMMA2
HD AUDIO
USB 8/9 (3.1)
LAN1
USB 6/7(3.1)
DIMMD2
DIMMD1
DIMMC2
DIMMC1
KB/Mouse
CLOSE 1st
OPEN 1st
JF1
LGA2066
VGA
LED1
JRK1
SP1
JTPM1
JPI2C1
JL1
JP
AC1
JWD1
JPG1
JPME2
CPU_FAN1
CPU_FAN2
SYS_FAN2
SYS_FAN3
SYS_FAN1
JBT1
JSD1
JLED1
JIPMB1
JSTBY1
MH15
MH12
MH14
JD1
J3701
LED6903
LED6904
LED7201
B2
JPW1
JPW2
JCOM1
PCH
RESET
POWER
JPB1
JPW3
BMC
1
