33
Chapter 2: Installation
BIOS
LICENSE
MAC CODE
IPMI CODE
BAR CODE
C9X299-PGF-L
REV
:1.01
+
1
+
PCIE M.2 M-2
PCIE M.2-M1
U.2-1
U.2-2
CLEAR CMOS
I-SATA5
I-SATA4
I-SATA3
USB 4/5(3.0)
USB 2/3
USB 0/1
PCH SLOT2 PCI-E 3.0 X1
USB 10/1
1(3.0)
CPU SLOT1 PCI-E 3.0 X8 (IN X16)
CPU SLOT7 PCI-E 3.0 X16
CPU SLOT3 PCI-E 3.0 X8 (IN X16)
CPU SLOT5 PCI-E 3.0 X8 (IN X16)
I-SATA2
I-SATA0
I-SATA1
DIMMA1
DIMMB2
DIMMB1
DIMMA2
HD AUDIO
USB 8/9 (3.1)
LAN1
USB 6/7(3.1)
DIMMD2
DIMMD1
DIMMC2
DIMMC1
KB/Mouse
CLOSE 1st
OPEN 1st
JF1
LGA2066
VGA
LED1
JRK1
SP1
JTPM1
JPI2C1
JL1
JP
AC1
JWD1
JPG1
JPME2
CPU_FAN1
CPU_FAN2
SYS_FAN2
SYS_FAN3
SYS_FAN1
JBT1
JSD1
JLED1
JIPMB1
JSTBY1
MH15
MH12
MH14
JD1
J3701
LED6903
LED6904
LED7201
B2
JPW1
JPW2
JCOM1
PCH
RESET
POWER
JPB1
JPW3
BMC
DIMM Installation
1. Insert DIMM modules in the following
order: DIMMA1, DIMMB1, DIMMC1,
DIMMD1, then DIMMA2, DIMMB2,
DIMMC2, DIMMD2. For the system to
work properly, use memory modules of the
same type and speed.
2. Align the DIMM module key with the
receptive point on the single-latch DIMM
slot.
3. Push the release tab outwards to unlock
the slot.
4. Align the notch on the end of the module
against the receptive point on the end of
the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Push the release tab to the lock position to
secure the module into the slot.
DIMM Removal
Reverse the steps above to remove the DIMM
modules from the motherboard.
Receptive Point
Release Tab
Notch
Push both ends straight
down into the memory slot.
