Chapter 4: UEFI BIOS
117
4.9 BIOS Update
This feature is used to update the BIOS version manually. Use the
"Start Update"
item to
begin flashing the new BIOS.
Start Update
Following these steps to prepare the BIOS Update with ME:
1. Click Start Update to enter the SuperFlash utility.
2. At the prompt, select Yes to reboot and configure the system to Flash mode. Select No
to cancel and view the BIOS information.
3. After the system reboots to the flash mode, the system is ready to flash the BIOS. At the
prompt, select OK to continue.
4. Select File and then in the pop-up menu select General USB Flash Disk 1.00.
5. Select the filename (i.e., "C9X299-PGF-L) in the pop-up menu.
6. Select Flash to flash the BIOS. A pop-up message will appear to show the progress of
the BIOS flash.
7. If the flash is successful, a pop-up message will indicate the result. Select OK to
complete the BIOS flash and to reboot the system. In the BIOS setup, confirm the BIOS
version on the upper motherboard information section.
