manualshive.com logo in svg

Supermicro AS-1023US-TR4, User Manual, Page: 52 / 132

Share
Download
Supermicro AS-1023US-TR4 User Manual Download Page 52

52

A+ Server AS -1023US-TR4 User's Manual

Chapter 4  

 

Motherboard Connections

This section describes the connections on the motherboard and provides pinout definitions. 
Note  that  depending  on  how  the  system  is  configured,  not  all  connections  are  required. 

The LEDs on the motherboard are also described here. A motherboard layout indicating 
component locations may be found in Chapter 1.
Please review the Safety Precautions in Chapter 3 before installing or removing components.

4.1 Power Connections

Two power connections on the H11DSU-iN must be connected to the power supply. The wiring 
is included with the power supply.

• 

Two 25-pin primary proprietary power (PSU1/PSU2) 

• 

Four 8-pin backplane power (P PWR1, BP PWR2, BP PWR3, BP PWR4)

• 

Three 8-pin GPU power (GPU PWR1, GPU PWR2, GPU PWR3)

Main Power Connector

The primary power connector must be connected to your power supply.

Backplane 12V and 5V 8-pin Power Connectors

BP PWR1–4 are 8-pin 12V and 5V DC power inputs for the system backplane. 

Backplane 8-pin Power

Pin Definitions

Pin#

Definition

1 - 4 Ground

5 - 6

+12V

7 - 8 +5V

GPU 12V 8-pin Power Connectors

GPU PWR1–3 are 8-pin 12V DC power inputs for GPUs that are installed in the system PCIe 
slots.

GPU 8-pin Power

Pin Definitions

Pin#

Definition

1 - 4 Ground
5 - 8 +12V

Summary of Contents for AS-1023US-TR4





































































































































Reviews:

No comments