10
A+ Server AS -1023US-TR4 User's Manual
Figure 1-1. Control Panel
1.4 Chassis Features
Control Panel
Power switches and status LEDs are located on the control panel on the front of the chassis.
Control Panel Features
Item
Features
Description
1
Power button
The main power switch applies or removes primary power from the power supply
to the server but maintains standby power. To perform most maintenance tasks,
unplug the system to remove all power..
2
Reset button
Reboots the system
3
Power LED
Indicates power is being supplied to the system power supply units. This LED is
illuminated when the system is operating normally.
4
HDD
Indicates activity on the hard drive when flashing
5
NIC1 LED
Indicates network activity on the LAN1 port when flashing.
6
NIC2 LED
Indicates network activity on the LAN2 port when flashing.
7
Information LED Alerts operator to several states, as noted in the table below
8
UID button/LED
The unit identification (UID) button turns on or off the blue light function of the
Information LED and a blue LED on the rear of the chassis. These are used to
locate the server in a rack.
1
6
5
4
3
7
2
8