Chapter 4: BIOS
85
Pending operation
Use this item to schedule a TPM-related operation to be performed by a security device for
system data integrity. Your system will reboot to carry out a pending TPM operation. The
options are
None
and TPM Clear.
Note
: Reboot the computer to change the state of the security device.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2 devices.
TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable support for both
versions. The default setting is
Auto
.
Current Status Information
This item displays the status of the TPM support on this motherboard.
•
TPM Enabled Status
•
TPM Active Status
•
TPM Owner Status
*The features from here to Device Select on the next page are displayed if a TPM 2.0
module is detected:
TPM20 Device Found
Vendor: IFX
Firmware Version: 5.51
Configuration
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled, onboard
security devices will be enabled for TPM support to enhance data integrity and network
security. Reboot the system for a change on this setting to take effect. The options are Disable
and
Enable
.
The following TPM information will be displayed:
•
Active PCR banks
•
Available PCR banks
*If the feature "Security Device Support" is set to Enable, the following features will
become available for configuration:
SHA-1 PCR Bank
Use this item to disable or enable the SHA-1 Platform Configuration Register (PCR) bank for
the installed TPM device. The options are Disabled and
Enabled
.
Summary of Contents for A2SDV-4C-LN10PF
Page 1: ...USER MANUAL Revision 1 0 A2SDV 4C LN8F A2SDV 8C LN8F A2SDV 4C LN10PF A2SDV 8C LN10PF...
Page 9: ...9 Chapter 1 Introduction Figure 1 1 A2SDV 4C LN8F Motherboard Image...
Page 10: ...10 A2SDV 4C 8C LN8F LN10PF User s Manual Figure 1 2 A2SDV 4C LN10PF Motherboard Image...
Page 11: ...11 Chapter 1 Introduction Figure 1 3 A2SDV 8C LN10F Motherboard Image...
