50
A+ Server AS -2124BT-H(N)TR User's Manual
TPM Header/Port 80 Connector
The JTPM1 header is used to connect a Trusted Platform Module (TPM), which is available
from Supermicro. A TPM is a security device that supports encryption and authentication in
hard drives. It enables the motherboard to deny access if the TPM associated with the hard
drive is not installed in the system.
For more information on TPM:
http://www.supermicro.com/manuals/other/TPM.pdf
.
Trusted Platform Module Header
Pin Definitions
Pin#
Definition
Pin#
Definition
1
LCLK
2
GND
3
LFRAME#
4
No Pin
5
LRESET#
6
NC
7
LAD3
8
LAD2
9
3.3V
10
LAD1
11
LAD0
12
GND
13
SMB_CLK4 (X)
14
SMB_DAT4 (X)
15
P3V3_STBY
16
SERIRQ
17
GND
18
LP_CLKRUN_L
19
P3V3_STBY
20
LDRQ0_L
PCIe M.2 Connector
The PCIe M.2 (J2) connector is for devices such as memory cards, wireless adapters, etc.
These devices must conform to the PCIe M.2 specifications (formerly known as NGFF). This
particular PCIe M.2 supports M-Key (PCIe x4 or SATA) storage card.
USB 3
The internal USB3 (USB 2.0) type A connector provides an internal access port with extensive
USB devices, which including the keyboard, mouse, as well as the USB DOM.
SATA Ports
The H12DST-B has six (6) available SATA 3.0 ports (SATA0~5) via a riser card supported
by CPU1. The yellow SATA6 connector supports Super-DOM with +5V power integrated in
the SATA connector.
Front Control Panel Connector
JF1 contains various buttons and indicators that are normally located on a control panel at
the front of the chassis.