Supermicro A+ AS-2124BT-HNTR User Manual Download Page 38

Page: 38 / 120

SuperServer AS -2124BT-H(N)TR User's Manual

3.4 Chassis Components

This section provides instructions on installing and replacing system components. To assure

compatibility, only use components that match the specifications or part numbers given.

Storage Drives

The system supports twenty-four hot-swap 2.5" storage drives. Each node controls:

•

AS -2124BT-HTR – Six SATA drives

•

AS -2124BT-HNTR – Four NVMe/SATA and two SATA drives

Note:

Enterprise level hard disk drives are recommended for use in Supermicro chassis

and servers. For information on recommended HDDs, visit the Supermicro website at

www.supermicro.com/aplus

Drive Carriers

The drives are mounted in drive carriers that simplify their removal from the chassis. These

carriers also help promote proper airflow. Even carriers without drives must remain in the
chassis for proper airflow.

Each drive carrier has two LED indicators: an activity indicator and a status indicator. The

status indicator remains off.

Drive Carrier LED Indicators

Color

Blinking Pattern

Behavior for Device

Activity

LED

Blue

Solid On

Drive installed

Blue

Blinking

I/O activity

Summary of Contents for A+ AS-2124BT-HNTR

























































































































Search results

Summary of Contents for A+ AS-2124BT-HNTR

Reviews:

Supermicro A+ AS-2124BT-HNTR, User Manual, Page: 38 / 120

Search results

Summary of Contents for A+ AS-2124BT-HNTR

Reviews: