Supermicro 8028B-C0R4FT, User Manual

Page: 93 / 144

Chapter 6: Advanced Chassis Setup
6-9
Replacing a Hard Drive in the Hard Drive Carrier (Figure 6-9 & Figure 6-10)
1. Remove the two screws that attach to the both sides of the dummy HDD.
2. Slide out the dummy HDD as shown
Figure 6-9: Removing the Dummy Hard Drive
3. Slide a hard drive into the HDD carrier.
4. Secure the HDD to the carrier with two screws on each side of the tray as
shown.
Figure 6-10: Installing the Hard Drive into the Carrier
1
1
1
1
1
2
1
3
1
4
1
4