Supermicro 8028B-C0R4FT, User Manual

Page: 62 / 144

5-12
SUPERSERVER 8028B-TR4F/C0R4FT User's Manual
Removing Memory Modules
Press both notches on the ends of the DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the memory slot.
Memory Support for the X10QBL-4(CT) Motherboard
The X10QBL-4(CT) has thirty-two (32) 288-pin DIMM sockets that can support
up to 1TB of Registered (RDIMM) or 4TB of Load Reduced (3DS LRDIMM) ECC
DDR4 1866/1600/1333 MHz speed SDRAM in a two-channel memory bus. Memory
sizes of 4GB, 8GB, 16GB, 32GB, 64GB and 128GB size @ 1.2V voltage are
supported. Use memory modules of the same type, speed, timing and same on a
serverboard. For the latest memory updates, please refer to our website a at
http://
www.supermicro.com/products/motherboard .
Note:
128 GB can only be supported with 3DS LRDIMM's.
Processor & Memory Module Population Confi guration
For memory to work properly, follow the tables below for memory installation.
Fully-Populated Confi guration
Please follow the instructions below to populate all DIMM slots:
Processors and their Corresponding Memory Modules
CPU# Corresponding DIMM Modules for Full-Populated
Confi guration
CPU 1
(P1M1-)
P1M1-
DIMM A1/B1
P1M1-
DIMM C1/D1
P1M1-
DIMM A2/B2
P1M1-
DIMM C2/D2
CPU2
(P2M1-)
P2M1-
DIMM A1/B1
P2M1-
DIMM C1/D1
P2M1-
DIMM A2/B2
P2M1-
DIMM C2/D2
CPU3
(P3M1-)
P3M1-
DIMM A1/B1
P3M1-
DIMM C1/D1
P3M1-
DIMM A2/B2
P3M1-
DIMM C2/D2
CPU4
(P4M1-)
P4M1-
DIMM A1/B1
P4M1-
DIMM C1/D1
P4M1-
DIMM A2/B2
P4M1-
DIMM C2/D2