Supermicro 8028B-C0R4FT, User Manual

Page: 128 / 144

7-32
SUPERSERVER 8028B-TR4F/C0R4FT User's Manual

EMS Console Redirection Settings
Out-of-Band Management Port
The feature selects a serial port in a client server to be used by the Windows
Emergency Management Services (EMS) to communicate with a remote host
server. The options are
COM1 (Console Redirection)
and COM2/SOL (Console
Redirection).
Terminal Type
Use this feature to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII character set. Select VT100+ to add
color and function key support. Select ANSI to use the extended ASCII character
set. Select VT-UTF8 to use UTF8 encoding to map Unicode characters into one
or more bytes. The options are ANSI, VT100, VT100+, and
VT-UTF8
.
Bits Per Second
This item sets the transmission speed for a serial port used in Console
Redirection. Make sure that the same speed is used in both host computer and
the client computer. A lower transmission speed may be required for long and
busy lines. The options are 9600, 19200, 57600, and
115200
(bits per second).
Flow Control
Use this item to set the fl ow control for Console Redirection to prevent data
loss caused by buffer over fl ow. Send a "Stop" signal to stop data-sending when
the receiving buffer is full. Send a "Start" signal to start data-sending when
the receiving buffer is empty. The options are
None,
Hardware RTS/CTS, and
Software Xon/Xoff.
The setting for each these features is displayed:
Data Bits, Parity, Stop Bits