Supermicro 8015C-T, User Manual

Page: 74 / 118

7-8
S
UPER
S
ERVER 8015C-T User's Manual
Offboard PCI/ISA IDE Card
This option allows the user to assign a PCI slot number to an off-board PCI/ISA
IDE card in order for it to function properly. The options are Auto , PCI Slot1, PCI
Slot2, PCI Slot3, PCI Slot4, PCI Slot5, and PCI Slot6.
IRQ3/IRQ4/IRQ5/IRQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15
This feature specifi es the availability of an IRQ to be used by a PCI, PnP device.
Select Reserved for an IRQ to be used by a Legacy ISA device. The options are
Available and Reserved.
DMA Channels 0~7
Select Available to indicate that a specifi c DMA channel is available to be used
by a PCI/PnP device. Select Reserved if a DMA channel specifi ed is reserved
for a Legacy ISA device.
Reserved Memory Size
This feature specifi es the size of memory block to be reserved for Legacy ISA
devices. The options are Disabled , 16K, 32K, 64K.
Super IO Confi guration Submenu
Onboard Floppy Controller
Select Enabled to enable the onboard fl oppy controller. The options are Enabled
and Disabled.
Serial Port1 Address/Serial Port2 Address
This option specifi es the base I/O port addresses and the Interrupt Request ad-
dresses for Serial Port 1 and Serial Port 2. Select Disabled to prevent the serial
port from accessing any system resources. When set to Disabled, the serial port
physically becomes unavailable. Select 3F8/IRQ4 to allow the serial port to use
3F8 as its I/O port address and IRQ 4 for the interrupt address. The options for
Serial Port 1 are Disabled, 3F8/IRQ4 , 3E8/IRQ4, and 2E8/IRQ3. The options for
Serial Port 2 are Disabled, 2F8/IRQ3 , 3E8/IRQ4 and 2E8/IRQ3.
Serial Port2 Mode
This option allows the user to confi gure the Serial Port2 Mode. The Options
are Normal , Sharp IR, SIR, and Consumer (-Confi gured).
Advanced Chipset Settings
This item allows the user to confi gure the Advanced Chipset settings for the
system.