Supermicro 7044H-82, User Manual

Page: 54 / 124

5-20
S
UPER
S
ERVER 7044H-82R/7044H-X8R/7044H-82 User's Manual
3rd Power Supply Alarm
Enable/Disable
The system can notify you in the
event of a power supply failure. This
feature assumes that three power
supply units are installed in the
c h a s s i s w i t h o n e a c t i n g a s a
backup. If you only have one or two
power supply units installed, you
should disable this (the default set-
ting) with JP13 to prevent false
alarms. See the table on the right
for pin definitions.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
Power Supply
Alarm Enable/Disable
Jumper Settings (JP13)