Supermicro 7034A-T, User Manual

Page: 39 / 104

Chapter 5: Advanced Serverboard Setup
5-11
X6DAL-TG/X6DAL-G Quick Reference
Jumper Description Default Setting
CN1 Alarm Reset Open (Disabled)
J13 SMB Data to PCI Enable/Disable Closed (Enabled)
J15 SMB Clock to PCI Enable/Disable Closed (Enabled)
J26 Audio Enable/Disable Closed (Enabled)
JBT1 CMOS Clear See Section 5-9
JPF Force Power On Enable/Disable Open (Disabled)
JPL1 LAN1 Enable/Disable Pins 1-2 (Enabled)
JPS1* SATA Controller Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Pins 2-3 (NMI)
Connector Description
ATX PWR Primary 24-pin ATX PWR Connector
DIMM#1A-#3B Memory (DIMM) Slots
DS7/DS8 POST Code LEDs (see Appendix A)
FAN#1-#6 CPU/Chassis Fan Headers
IDE1, IDE2 IDE1/2 Hard Disk Drive Connectors
J2 Keyboard/Mouse Ports
J4/J5 COM1/COM2 Serial Port Connectors
J6 Bottom: Line In Top: Line Out
J7 Power Fault Header
J24 Floppy Disk Drive Connector
J27 Power System Management
J35 SATA SMB (I
2
C) Header
J41 Auxiliary In
J50 CD In
J52-J55 SATA Ports 0/1/2/3 (Marvel Controller)
J61 Microphone
JF1 Front Panel Control Header
JF2 Speaker, PWR LED, Keylock
JL1 Chassis Intrusion Header
JS0/JS1 Hance Rapids SATA Ports 0/1
JSLED* SATA LED Header
LAN1 Gigabit Ethernet Port
PWR2 12V 8-pin CPU Power Connector
PWR3 12V 4-pin Power Connector
USB 0/1 Back Panel Universal Serial Bus Ports
USB 2/3 (J42) Front Panel Universal Serial Bus Ports
WOL (JWOL) Wake-on-LAN
WOR (JWOR) Wake-on-Ring Header
*X6DAL-TG only